What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
What're your opinions about How to Troubleshoot and Repair an Electric Water Heater?
Numerous contemporary homes take advantage of an electrical water heater for their furnace, as a result of its benefit and also simplicity of use. However, similar to any other electrical appliances, problems might occur with its use, suddenly. It can be really irritating to get up to a cool shower rather than a warm one or having your bath with water that isn't warm enough or perhaps too warm. Whatever the situation might be, water heater troubles can be rather stressful. The good news is, we've made a checklist of possible remedies to your water heater concerns. There are a number of elements that can cause much of these problems, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety. Whatever the issue is, getting it dealt with ought to not posture too much of a problem if you adhere to these steps:
Call A Specialist:
If after replacing all defective components and resetting your temperature level, the hot water heater still isn't working, you may require to speak to an expert plumber for a professional viewpoint. The trouble with your heating system could be that the hot and cold taps have been changed or it might be undersized for the quantity of hot water needed in your home. Whatever the case may be, an expert plumber would certainly help resolve the issue.
Examine Your Power Supply:
As basic as this may appear, it is really necessary. Without sufficient power, your hot water heater will certainly not operate. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker tripped. If the breaker is the concern, merely transform it off and on once more. Replace any damaged or worn-out fuse. Check the device with power after these adjustments to see if it's now working.
Check Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm sufficient, you might require to examine the temperature level setups on your upper thermostat. Ensure the circuit breaker is switched off before doing anything. Open the gain access to panel as well as press the red button for temperature level reset over the thermostat. This must aid warm the water. Transform the breaker back on and also examine if the trouble has actually been settled.
Examine the Burner in the Hot Water Heater:
If it's not a power trouble, after that try taking a look at your heating element if it is still working. Evaluate each of your heating elements to make sure the problem isn't with any of them. If any of them is faulty, replace that component and afterwards examine whether the warm water is back on.
Final thought
Water heater problems are not constantly significant. A number of them are due to small concerns like a blown fuse or worn-out heating element. Changing the malfunctioning parts should work. However, if you are still unable to address the issue, give a call to your nearest plumber ahead to get it taken care of.
8 possible reasons why you have no Hot Water
Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.
Water Leak
Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.
Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.
Gas Heater: Gas Leak
If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.
Gas Heater: Pilot Light Problems
There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.
Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.
Gas Heater: Faulty Thermocouple
The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.
Electric Heater: Breaker Blues
Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.
Electric Heater: Reaching The Limit
If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.
Electric Heater: Heating Element
If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.
https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/
We were made aware of that article about Hot Water Heater Repair from an associate on a different website. Sharing is caring. Helping others is fun. Thank-you for your time invested reading it.
Request Estimate
Report this page